H-10 Record
H-10 Record
H-10 COBOL Record Layout
H-10 Record Data Dictionary
H-10 Record Position Length Data Item Data Type Notes 1 - 6 6 Operator Number Numeric 7 - 9 3 Report Type Alphanumeric Must be 'H10' 10 - 11 2 District Numeric Must be one of the following: 01,02,03,04,05, 06,08,09, 10, 11,13,14 12 1 Record Type Alphanumeric Must be 'R' 13 - 21 9 UIC Control No. Numeric 22 - 50 29 Filler Alphanumeric Must be spaces 51 - 52 2 Cycle Year Numeric 53 - 54 2 Cycle Month Numeric 55 - 58 4 Avg. Inj PSIG Numeric 59 - 62 4 Max Inj PSIG Numeric 63 - 70 8 Vol Inj BBLS Numeric 71 - 78 8 Vol Inj MCF Numeric 79 - 80 2 Annulus Count Alphanumeric 81 - 84 4 Annulus Min PSIG Alphanumeric 85 - 88 4 Annulus Max PSIG Alphanumeric 89 - 98 10 Filler Alphanumeric Must be spaces 99 - 102 4 Due Date Numeric In Year (without the century), Month order 103 - 104 2 Filler Alphanumeric 105 - 109 5 Lease Number Numeric 110 - 115 6 Gas ID Number Numeric 116 - 121 6 Well Number Alphanumeric 122 - 129 8 Field Number Numeric 130 - 161 32 Field Name Alphanumeric 162 - 193 32 Lease Name Alphanumeric 194 - 206 13 County Name Alphanumeric 207 1 Filler Alphanumeric 208 - 212 5 Depth Top Inj Numeric Interval 213 - 217 5 Depth Bottom Numeric Inj Interval 218 1 Injection Thru Alphanumeric 219 - 223 5 Depth Packer Numeric 224 1 SW Injected Alphanumeric 225 1 FW Injected Alphanumeri 226 1 BW Injected Alphanumeric 227 1 Air Injected Alphanumeric 228 1 Gas Injected Alphanumeric
229 1 Polymer Injected Alphanumeric 230 1 CO2 Injected Alphanumeric 231 1 Other Fluid Alphanumeric Injected 232 - 251 20 Fluid Comment Alphanumeric 252 1 Norm Injected Alphanumeric 253 1 Fluid From Alphanumeric Other Source 254 - 260 7 Filler Alphanumeric 261 - 268 8 API Number Numeric 269 - 400 132 Filler Alphanumeric H-10 COBOL Record Layout The position numbers on the right hand side give the beginning position for that data item. 01 H10-REPORT-RECORD. POSITION 03 H10-RECORD-ID. 05 H10-OPERATOR-NO PIC 9(6). 1 05 H10-REPORT-TYPE PIC X(3). 7 88 H10-REPORT VALUE 'H10'. 05 H10-DISTRICT PIC 9(2). 10 88 H10-VALID-DISTRICT VALUE 01,02,03, 04,05,06,07,08, 09,10,11,13,14. 05 H10-RECORD-TYPE PIC X(1). 12 88 H10-REPORT-REC VALUE 'R'. 05 H10-UIC-CONTROL-NO PIC 9(9). 13 05 FILLER PIC X(29). 22 05 H10-CYCLE-MONTH-DATA. 07 H10-CYCLE-YEAR PIC 9(2). 51 07 H10-CYCLE-MONTH PIC 9(2). 53 07 H10-AVG-INJ-PSIG PIC 9(4). 55 07 H10-MAX-INJ-PSIG PIC 9(4). 59 07 H10-VOL-INJ-BBLS PIC 9(8). 63 07 H10-VOL-INJ-MCF PIC 9(8). 71 07 H10-ANNULUS-DATA. 09 H10-ANNULUS-COUNT PIC 9(2). 79 09 H10-ANNULUS-MIN-PSIG PIC 9(4). 81 09 H10-ANNULUS-MAX-PSIG PIC 9(4). 85 07 H10-ANN-DATA-SPACE REDEFINES H10-ANNULUS-DATA. 09 H10-ANN-CNT-S PIC X(2). 09 H10-ANN-MIN-S PIC X(4). 09 H10-ANN-MAX-S PIC X(4). 05 FILLER PIC X(10). 89 05 H10-DUE-DATE. 07 H10-DUE-YEAR PIC 9(2). 99 07 H10-DUE-MONTH PIC 9(2). 101 03 FILLER PIC X(2). 103 03 H10-LEASE-NO PIC 9(5). 105 03 H10-GASID-NO PIC 9(6). 110 03 H10-WELL-NO PIC X(6). 116 03 H10-FIELD-NO PIC 9(8). 122 03 H10-FIELD-NAME PIC X(32). 130 03 H10-LEASE-NAME PIC X(32). 162 03 H10-COUNTY-NAME PIC X(13) 194 03 FILLER PIC X(1). 207 03 H10-DEPTH-TOP-INJ-INTERVAL PIC 9(5). 208 03 H10-DEPTH-BOT-INJ-INTERVAL PIC 9(5). 213 03 H10-INJ-THRU PIC X(1). 218 88 H10-THRU-TUBING VALUE 'T'. 88 H10-THRU-CASING VALUE 'C'. 03 H10-DEPTH-PACKER PIC 9(5). 219 03 H10-TYPE-INJ-FLUID. 05 H10-SW PIC X(1). 224 88 H10-SW-INJECTED VALUE 'Y'. 88 H10-SW-NOT-INJECTED VALUE 'N'. 05 H10-FW PIC X(1). 225 88 H10-FW-INJECTED VALUE 'Y'. 88 H10-FW-NOT-INJECTED VALUE 'N'. 05 H10-BW PIC X(1). 226 88 H10-BW-INJECTED VALUE 'Y'. 88 H10-BW-NOT-INJECTED VALUE 'N'. 05 H10-AIR PIC X(1). 227 88 H10-AIR-INJECTED VALUE 'Y'. 88 H10-AIR-NOT-INJECTED VALUE 'N'. 05 H10-GAS PIC X(1). 228 88 H10-GAS-INJECTED VALUE 'Y'. 88 H10-GAS-NOT-INJECTED VALUE 'N'. 05 H10-POLYMER PIC X(1). 229 88 H10-POLYMER-INJECTED VALUE 'Y'. 88 H10-POLYMER-NOT-INJECTED VALUE 'N'. 05 H10-CO2 PIC X(1). 230 88 H10-CO2-INJECTED VALUE 'Y'. 88 H10-CO2-NOT-INJECTED VALUE 'N'. 05 H10-OTHER-FLUID PIC X(1). 231 88 H10-OTHER-INJECTED VALUE 'Y'. 88 H10-OTHER-NOT-INJECTED VALUE 'N'. 05 H10-FLUID-COMMENT PIC X(20). 232 05 H10-NORM PIC X(1). 252 88 H10-NORM-INJECTED VALUE 'Y'. 88 H10-NORM-NOT-INJECTED VALUE 'N'. 05 H10-FLUID-OTHER-SOURCE PIC X(1). 253 88 H10-FLUID-FROM-OTHER VALUE 'Y'. 88 H10-FLUID-NOT-FROM-OTHER VALUE 'N'. 03 FILLER PIC X(7). 254 03 H10-API-NUMBER. 05 H10-API-COUNTY PIC 9(3). 261 05 H10-API-SUFFIX PIC 9(5). 264 03 FILLER PIC X(132). 269 H-10 Record Data Dictionary H10-OPERATOR-NO The operator number assigned to the company by the RRC. Taken from the Organization Report (Form P-5). H10-REPORT-TYPE Must be 'H10' for H-10 reports. H10-DISTRICT The RRC district in which the well is located. See DR-DISTRICT for further details. H10-RECORD-TYPE Must be 'R' for report records.
H10-UIC-CONTROL-NO Must be the unique number assigned to the well by RRC Environmental Services. H10-CYCLE-YEAR Must be a valid two-digit numeric cycle year. H10-CYCLE-MONTH Must be a valid two-digit numeric cycle month. H10-AVG-INJ-PSIG The average injection pressure reported for the H10-CYCLE-MONTH. Must be less than or equal to the H10-MAX-INJ-PSIG. Must contain zeros if there is nothing to report. H10-MAX-INJ-PSIG The maximum injection pressure reported for the H10-CYCLE-MONTH. Must be greater than or equal to the H10-AVG-INJ-PSIG. Must contain zeros if there is nothing to report. H10-VOL-INJ-BBLS The total volume of liquid (barrels) that was injected for the reported H10-CYCLE-MONTH. Must contain zeros if there is nothing to report. H10-VOL-INJ-MCF The total volume of gas (MCF) that was injected during the reported H10-CYCLE-MONTH. Must contain zeros if there is nothing to report. H10-ANNULUS-COUNT This is a count of the annulus readings taken during the reported H10-CYCLE-MONTH. H10-ANN-CNT-S must contain spaces if there is nothing to report. H10-ANNULUS-MIN-PSIG This is the minimum annulus pressure (PSIG) reported during the H10-CYCLE-MONTH. Must be less than or equal to the reported H10- ANNULUS-MAX-PSIG. H10-ANN-MAX-S must contain spaces if there is nothing to report. H10-ANNULUS-MAX-PSIG This is the maximum annulus pressure (PSIG) reported during the H10-CYCLE-MONTH. Must be greater than or equal to the reported H10-ANNULUS-MIN-PSIG. H10-ANN-MIN-S must contain spaces if there is nothing to report. H10-FRESH-WTR-INJ-BBLS This is the amount of fresh water injected in barrels. H10-DUE-DATE This is the date the report is due in year, month format. H10-LEASE-NO Must be a valid five-digit, RRC-assigned oil lease number. If this report pertains to a gas well, this field must contain zeros. H10-GASID-NO Must be a valid six-digit, RRC-assigned gas identification number. If this report pertains to an oil lease, this field must contain zeros. H10-WELL-NO Must be a valid six-character alphanumeric well number. H10-FIELD-NO The eight-digit number assigned to the field by the RRC. H10-FIELD-NAME The field name exactly as shown on the RRC proration schedule. H10-LEASE-NAME The lease name exactly as shown on the RRC proration schedule. H10-COUNTY-NAME Must be a valid 13 character alphanumeric county name. The H10- API-COUNTY code must match this county name. H10-DEPTH-TOP-INJ-INTERVAL This is the depth of the well to the top of the injection or disposal zone. Must be numeric. H10-DEPTH-BOT-INJ-INTERVAL This is the depth of the well to the bottom of the injection or disposal zone. Must be numeric. H10-INJ-THRU This is to determine if injection is through tubing or casing. Value as 'T' for tubing or 'C' for casing. H10-DEPTH-PACKER This is the depth of the tubing packer. Must be numeric. H10-SW Indicates if salt water is injected into the well. Value as 'N' for not injecting salt water or 'Y' for injecting salt water. H10-FW Indicates if fresh water is injected into the well. Value as 'N' for not injecting fresh water or 'Y' for injecting fresh water. H10-BW Indicates if brackish water is injected into the well. Value as 'N' for not injecting brackish water or 'Y' for injecting brackish water. H10-AIR Indicates if air is injected into the well. Value as 'N' for not injecting air or 'Y' for injecting air. H10-GAS Indicates if natural gas is injected into the well. Value as 'N' for not injecting natural gas or 'Y' for injecting natural gas. H10-POLYMER Indicates if polymer is injected into the well. Value as 'N' for not injecting polymer or 'Y' for injecting polymer. H10-CO2 Indicates if carbon dioxide is injected into the well. Value as 'N' for not injecting carbon dioxide or 'Y' for injecting carbon dioxide. H10-OTHER-FLUID If the type of fluid injected is other than the types listed, this field must be valued as 'Y' and H10-FLUID-COMMENT (below) must contain a comment. A value of 'N' indicates that other fluids were not injected and H10-FLUID-COMMENT (below) must contain spaces. H10-FLUID-COMMENT Must contain a comment if the H10-OTHER-FLUID is valued as 'Y'. Otherwise, this field must contain spaces. H10-NORM Indicates if norm is injected into the well. Value as 'N' for not injecting norm or 'Y' for injecting norm. H10-FLUID-OTHER-SOURCE Indicates if injected fluids are produced from other sources other than your own. Value as 'N' for fluids are not from other sources or 'Y' for fluids are from other sources. H10-API-NUMBER The unique eight-digit American Petroleum Industry (API) number identifying the well bore for the well. The first three digits are the county code and the next five digits are the unique number. The state code of 42 is assumed.
